(704) 864 2470 info@nussbaum-usa.com

HF NT – Two Post Lift

The HF NT series is a revolutionary hydraulic two post lift. The patented HyperFlow® technology allows the lift to be perfectly and automatically synchronized without cables or pulleys. A double hydraulic circuit with 4 cylinders makes a mechanical locking system no longer necessary. This new generation of lifts are the perfect solution to increase the productivity and efficiency of the workshop while reducing cost of ownership.

Two Post Lift HF 8000 NT


HyperFlow® Advantages

  • 4 cylinders in the lift with no mechanical locks thanks to the redundant hydraulic system
  • The synchronization is automatically performed in the top position
  • Manual equalization valves to ensure synchronization are no longer required
  • Automatic equalization of the hydraulic system when approaching maximum raised position
  • Reduced wear parts, no mechanical locks, no cables or pulleys


  • 2 variations available with 8,000 lb capacity with asymmetric arms and 11,000 lb and unique double-jointed arms
  • Fast lifting and lowering times guarantee high cost effectiveness
  • Powerful and uniform lifting with control lever
  • No floor connection and no top static connection of the columns is necessary
  • NT System – double hydraulic system replaces mechanical locks
  • HyperFlow® technology ensures synchronization without cables or pulleys
  • Nearly wear-free hydraulic cylinders
  • Self-equalization system for the hydraulic system
  • Slim design – cylinders are protected behind covers
  • Far reach arms to pick up long vans with lowest lifting point
  • Low noise oil-submerged motor
  • Extremely low maintenance lift – no expensive parts to be replaced and no down time during servicing

HyperFlow Technology Hydraulic Two Post Lift



Additional HyperFlow® Lifts:

HF 11000



 HF 8000 NT  HF 11000 NT DG
Lifting Capacity (lb) 8000 11000
Lifting Time Approx. (sec) up/down 26/15 31/15
Lifting Height (in) 80.75″ 80.75″
Low Lifting Point (in) min/max 4.5″ – 7.5″ 4.75″ – 7.75″
Total Height Column (in) 158.5″ 156″
Total Height w/Riser Pipe (in) min/max 161.8″ – 193.25″ 161.8″ – 191.5″
Drive-Through Width (in) 99.25″ 109.75″
Total Width (in) 132″ 147.5″
Long Arms Extraction (in) min/max 44.5″ – 72.5″ 0″ – 71.85″
Short Arms Extraction (in) min/max 22.5″ – 45.75″
Power Supply (V/Hz/ph) 208/230 / 1ph / 20 AMP 208/230 / 1ph / 20 AMP
Motor (hp) 3 3

*All technical data are subject to change.

Related Portfolio